Settings of the Ethernet board

Aim

If camera is setup correctly based on this Help and you have checked all the System requirements and yet there are camera issues in EthoVision XT, e.g. dropped frames, it may be good to check the settings of the Ethernet interface board.

Procedure

1.In the Windows search field, type in device. In the results list click Device Manager.

2.Open the Network adapters item.

3.Locate the item that has the same name as the network port connected to the camera.

 

4.Right-click that item in the Device Manager and select Properties, then click the Advanced tab.

5.Adjust the settings as here:

▪Interrupt Moderation: Disabled.

▪Interrupt Moderation Rate: Off.

▪Receive Buffers: 2048.

▪Jumbo Packet: 9014 Bytes.

6.Click the Power Management tab and de-select Allow the computer to turn off this device to save power.